Renishaw SCR200 CMM Stylus Rack PI200 TP200 & 2 SF Modules with 90 Day Warranty

Description

Powered by
Frooition
Shop Categories
Other
Renishaw Products
Ram Optical and OGP
Masters and Standards
Precision Measuring Tools
CMM and VMM Probing Systems
Machine Tool Probing Systems
CMM Parts
Video Measuring Machine Parts
Coordinate Measuring Machines
Video Measuring Machines
Profile Surface and Roundness
Renishaw SCR200 CMM Stylus Rack PI200 TP200 & 2 SF Modules with 90 Day Warranty
Item Description
Used Tested Renishaw SCR200 Stylus changing rack and PI200 Interface.
Used tested TP200 CMM probe body with two used tested TP200 probe modules.
New SCR200 5m Cable, SCR200 Mounting Kit and SCR200 Location Plate.
The TP200 is a electronic probe using strain gauge technology which gives higher accuracy than kinematic touch trigger probes.
Renishaws current retail price for all that is included in this sale is 05.00
About TP200
The TP200 system components are:
TP200 or TP200B probe body (the TP200B is a variant with increased vibration tolerance)
TP200 stylus module - choice of fixed overtravel forces: SF (standard force) or LF (low force)
PI200 probe interface
SCR200 stylus changing rack
There is also an EO module (extended overtravel) which has the same overtravel force as the SF but provides increased operating range and protection in the probe Z axis.
Features and benefits
Strain-gauge technology offers excellent repeatability and precision 3D form measurement.
Zero reseat errors.
No lobing effect.
6-way measuring capability
Stylus reach of up to 100 mm (GF styli)
Rapid probe module changing without the need to re-qualify the stylus tips
Life of >10 million triggers
TP200 / TP200B probe body
The TP200 probe uses micro strain gauge transducers to deliver excellent repeatability and accurate 3D form measurement even with long styli.
The sensor technology gives sub-micron repeatability and eliminates the lobing characteristics encountered with kinematic probes. The solid state ASIC electronics within the probe ensure reliable operation over millions of trigger points.
The TP200B uses the same technology as TP200 but has been designed to have higher tolerance to vibration. This helps to overcome the problem of 'air' trigger generation which can arise from vibrations transmitted through the CMM or when using long styli with faster positioning speeds.
Please note that we do not recommend the use of TP200B with the LF module or cranked/star styli.
TP200 specification
Summary
TP200
TP200B
Principal application
DCC CMM where high accuracy is required.
As TP200 but where 'air' trigger events occur.
Sense directions
6-axis: ±X, ±Y, ±Z
6-axis: ±X, ±Y, ±Z
Unidirectional repeatability (2s µm)
Trigger level 1:  0.40 µm (0.000016 in)
Trigger level 2:  0.50 µm (0.00002 in)
Trigger level 1:  0.40 µm (0.000016 in)
Trigger level 2:  0.50 µm (0.00002 in)
XY (2D) form measurement deviation
Trigger level 1:  ±0.80 µm (0.000032 in)
Trigger level 2:  ±0.90 µm (0.000036 in)
Trigger level 1:  ±1 µm (0.00004 in)
Trigger level 2:  ±1.2 µm (0.000047 in)
XYZ (3D) form measurement deviation
Trigger level 1:  ±1 µm (0.00004 in)
Trigger level 2:  ±1.40 µm (0.000056 in)
Trigger level 1:  ±2.50 µm (0.0001 in)
Trigger level 2:  ±4 µm (0.00016 in)
Repeatability of stylus change
With SCR200:  ±0.50 µm (0.00002 in) max.
Manual:  ±1 µm (0.00004 in) max.
With SCR200:  ±0.50 µm (0.00002 in) max.
Manual:  ±1 µm (0.00004 in) max.
Trigger force (at stylus tip)
XY plane (all modules):  0.02 N
Z axis  (all modules):  0.07 N
XY plane (all modules):  0.02 N
Z axis  (all modules):  0.07 N
Overtravel force (@ 0.50 mm displacement)
XY plane (SF/EO module):  0.2 N to 0.4 N
XY plane (LF module):  0.1 N to 0.15 N
Z axis (SF/EO module):  4.90 N
Z axis (LF module):  1.60 N
XY plane (SF/EO module):  0.2 N to 0.4 N
XY plane (LF module):  0.1 N to 0.15 N
Z axis (SF/EO module):  4.90 N
Z axis (LF module):  1.60 N
Weight (probe sensor and module)
22 g (0.78 oz)
22 g (0.78 oz)
Maximum extension (if on a PH10 series head)
300 mm (11.81 in)
300 mm (11.81 in)
Maximum recommended stylus length (M2 styli range)
SF/EO module:  50 mm (1.97 in) steel to 100 mm (3.94 in) GF
LF module:  20 mm (0.79 in) steel to 50 mm (1.97 in) GF
SF/EO module:  50 mm (1.97 in) steel to 100 mm (3.94 in) GF
LF module:  20 mm (0.79 in) steel to 50 mm (1.97 in) GF
Mounting method
M8 thread
M8 thread
Suitable interface
PI200, UCC
PI200, UCC
Stylus module changing rack
Automatic:  SCR200
Manual:  MSR1
Automatic:  SCR200
Manual:  MSR1
Stylus range
M2
M2
TP200 stylus modules
The stylus module is mounted on the TP200/TP200B probe body via a highly repeatable magnetic kinematic joint, providing a rapid stylus changing capability and probe overtravel protection.
There are three modules available, with 2 different overtravel forces.
Module
SF (standard force)
LF (low force)
EO (extended overtravel)
Application
General use.
Small diameter stylus balls or where minimum force is essential.
Extra overtravel to enable the CMM to stop safely from higher probing speeds.
Comments
Styli up to 100 mm long and ball diameter > 1 mm.
Balls less than 1 mm diameter.
Same overtravel force as SF.
Extra 8 mm of overtravel in probe Z axis.
SCR200 changing rack
The SCR200 provides automatic, high speed changing of up to six TP200 stylus modules. The SCR200 is powered by the separate probe interface, PI200, and provides features to facilitate safe stylus changing. The SCR200 is available in low force and standard force kits, where each kit comprises one SCR200 plus three stylus modules of the same force.
Specification
Height
190 mm (7.84 in)
Width
245 mm (9.65 in)
This is by the far the best price you will find on all that is included in this sale.
If you would like to add additional probing please do not hesitate in
contacting us.
Why pay retail prices when you can purchase with warranty from Metrology Parts.
Purchase with confidence from a Paypal verified retailer with 90 day warranty.
If what you order is not what you receive you will be refunded the full purchase price for this sale.
Metrology Parts would like the opportunity to earn your business for this sale and all of your future Renishaw needs.
If you have any questions feel free to contact us. With 34 plus years of experience with Renishaw products we can help with all of your application needs as well as your after sales support.
About Us
About Us
Payment
Shipping
Terms
Returns
About Us
Payment
Payment
Shipping
Shipping
Terms
Terms
Returns
Returns
Metrology Parts always strives for 100% customer satisfaction. If for any reason, you are unhappy with your purchase from us we would like to hear from you on how we could have improved your shopping experience. We understand that sometimes mistakes can be made in orders or sometimes there is buyer?s remorse. We have a 60 day return policy on all items. Please do be advised that all items need to be returned in original packaging with all manuals, certificates and unopened tool kits. If items have been installed and show installation marks we can only offer a partial refund on items we cannot resell as new or return to the factory. If you are having issues with equipment in your facility and are in need of help troubleshooting prior to purchase, we offer free technical support to make sure the correct parts get ordered. Free technical support is also offered on all items purchased to make sure your installation goes smoothly. Should you need to return items purchased from Metrology Parts please contact us for an RMA, address we would like the item shipped and instructions on shipping your return to us safely. On behalf of Metrology Parts, we would like to thank you in advance for the opportunity to earn your business.
Helpful Links
Add to Favorite Sellers
Sign up to Newsletter
View Feedback
Contact Seller
Visit seller's eBay Shop
About Seller Page
More Items!
View more great items
Renishaw TP20 EM1 CMM Coordinate Measuring Probe Module New One Year Warranty
&dollar945.00
Renishaw SP25M-2 CMM Scanning Probe Kit 2 New in Box With 1 Year Warranty
&dollar6,250.00
Renishaw TP20 NI CMM Probe Kit with 1 TP20 Low Force Module New In Box Warranty
&dollar1,500.00
Renishaw CMM IS1-2 Interface Selector & SP25M Program Module Kit New - Warranty
&dollar1,650.00
Powered by
Frooition
Frooition Frooition | No-js Template | eBay design, eBay store design, eBay shop design, eBay template design, eBay listing design (ver:froo_no_js)
This listing is currently undergoing maintenance, we apologise for any inconvenience caused.